Hardware reference guide

Power Supplies
35013379 02 October 2007 77
LED Indicator
and Description
The following figure shows the CPS11100 (PV01 or greater) LED indicator.
The following table shows the CPS11100 (PV01 or greater) LED description.
Wiring Diagram The following figure shows the CPS11100 (PV01 or greater) wiring diagram.
Note: For "closed system" installations, connector 140XTS00 500 must be used
(refer to Closed System Installation, p. 795 ).
LED Description
LEDs Color Indication when On
Pwr ok Green Power is supplied to the bus.
Pwr ok
Note: See Power and Grounding Considerations for AC and DC Powered
Systems, p. 776 for power and grounding wiring guidelines and operational
information.
AC L
AC N
1
2
3
4
5
6
7
}
Internally connected. Do not connect any external
wiring to these points.
Install jumper for 115 VAC operation only.
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com