Hardware reference guide

Hardware Installation
35013379 02 October 2007 765
Hardware Installation – Mounting Brackets
Overview Brackets are required when mounting backplanes in 19 inch NEMA cabinets. These
brackets support the 2 through 10 position backplanes. The bracket mounts to rails
using standard NEMA hardware.
Mounting brackets are offered in two sizes: 20 mm for back rail mounting, and
125 mm for front rail mounting (refer to the following illustrations).
Backplane
Mounting
Brackets
The following table shows the mounting brackets.
Part Number Description
140XCP40100 125 mm Bracket
140XCP40200 20 mm Bracket
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com