Hardware reference guide

Hardware Installation
35013379 02 October 2007 763
Ten Position
Backplane
Figure
The following figure shows the ten position backplane.
A 290 mm / 11.42 inches
B 270 mm / 10.63 inches
C 175.5 mm / 6.91 inches
D 94.5 mm / 3.72 inches
E 10 mm / 0.39 inches
F 15 mm / 0.59 inches
G 427.66 mm / 16.84 inches
H 397.56 mm / 15.65 inches
I 198.78 mm / 7.825 inches
F
G
H
A
B
C
D
E
Ground Screws
=Mounting Hole
Diameter: 8mm/0.31 inches.
=Optional locations for Modbus Plus communication cable grounding.
Diameter: 8 mm/0.31 inches
=Threaded mounting holes for half and full height modules.
Diameter: 4mm/0.16 inches
I
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com