Hardware reference guide

Hardware Installation
760
35013379 02 October 2007
Three Position
Backplane
Figure
The following figure shows the three position backplane.
A 290 mm / 11.42 inches
B 270 mm / 10.63 inches
C 175.5 mm / 6.91 inches
D 94.5 mm / 3.72 inches
E 10 mm / 0.39 inches
F 15 mm / 0.59 inches
G 143.13 mm / 5.64 inches
H 113.08 mm / 4.45 inches
A
B
C
D
E
F
G
H
Ground Screws
=Mounting Hole
Diameter: 8mm/0.31 inches.
=Optional locations for Modbus Plus
communication cable grounding.
Diameter: 8 mm/0.31 inches
=Threaded mounting holes for
half and full height modules.
Diameter: 4mm/0.16 inches
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com