Hardware reference guide

I/O Modules
724
35013379 02 October 2007
Fuse Locations The following figure shows the fuse locations for the DAM59000 module.
Revision Numbr
Location for RIO
Drop
The following figure shows the revision number location.
Note: If the 140DAM59000 module is used in a RIO drop, the 140CRA93X00 RIO
Drop must be Version 1.04 at a minimum. Check the version label (see below) on
the top front of the 140CRA93X00 module and ensure that it is at the proper
revision level
140
DAM 590 00
120 VAC IN/OUT
X
Fuse Locations
Points
1-4
Points
5-8
Note: Since this original note, revision marking format has changed. Any RIO drop
module with PV/RL/SV formatted labeling is acceptable.
140
CRA 932 00
RIO DROP
S908
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com