Hardware reference guide

I/O Modules
722
35013379 02 October 2007
Output
Specifications
The following table shows the Output specifications.
Output Specifications
Absolute Maximum Output Voltages
Continuous 85 ... 132 Vac
10 seconds 156 Vac
1 cycle 200 Vac
On State Drop / Point 1.5 Vac
Minimum Load Current (rms) 5 mA
Maximum Load Current (rms)
Each Point* 4 A continuous
Each Group 4 A continuous
Per Module* 8 A continuous (see the derating chart below)
Off State Leakage / Point (max) 2 mA @ 115 Vac
Surge Current Maximum (rms)
One Cycle
Two Cycles
Three Cycles
Per Point
Per Group
30 A 45 A
20 A 30 A
10 A 25 A
Response
OFF - ON, ON - OFF 0.50 of one line cycle max
Applied DV / DT 400 V/μs
Output Protection RC snubber suppression (internal)
9
8
7
6
5
4
3
2
1
40 45 50 55 60
85-132V rms
T
O
T
A
L
M
O
DUL
E
L
O
A
D
CURRE
NT
(
A
)
AMBIENT TEMPERATURE (°C)
DAM59000 Operating Curve*
*The specifications stated are pending UL/CSA approval. This module
was originally approved at 2 A each point; 7 A, 0 ... 50° C per group.
0
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com