Hardware reference guide

I/O Modules
718
35013379 02 October 2007
I/O Map Status
Byte (Outputs)
The four least significant bits in the I/O map status are used as follows:
Modsoft Module
Zoom Selections
(Outputs)
Push <Enter> to display and select the timeout state for the module. Timeout state
is assumed when the system control of the module is stopped.
16-Point Input/8-
Point Output
Modules
The following information pertains to the 140DAM59000 (AC Input 115 Vac 2x8 / AC
Output 115 Vac 2x4) and the 140DDM39000 (DC Input 24 Vdc 2x8 / DC Output 24
Vdc 2x4) modules.
z 140DAM59000 (AC Input 115 Vac 2x8 / AC Output 115 Vac 2x4)
z 140DDM3900 (DC Input 24 Vdc 2X8 / DC Output 24 Vdc 2x4)
I/O Map Register
Assignments
The modules listed above can be configured as either 16 contiguous 1x references
or as one 3x register and as one 4x register.
I/O Map Register
(Inputs)
The following figure shows the 3x input register.
I/O Map Status
Byte (Inputs)
There is no input I/O map status byte associated with these modules.
Output 1 Fault
12345678
Output 2 Fault
Output 3 Fault
Output 4 Fault
Default Output State:
User Defined Timeout State Point 1 - 4:
0000
Hold Last Value
User Defined
1234567 10 11 12 13 14 15 1689
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com