Hardware reference guide

I/O Modules
672
35013379 02 October 2007
Possible Equipment Failure
Each group is protected with a 5 A fuse to protect the module from catastrophic
failure. The group fuse will not be guaranteed to protect each output switch for all
possible overload conditions. It is recommended that each point be protected with
a 3/4 A, 250 V fuse (Part # 57-0078-000).
Failure to follow these instructions can result in injury or equipment damage.
WARNING
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com