Hardware reference guide

I/O Modules
35013379 02 October 2007 665
Specifications The following table shows the specifications for the 5 V OUT module.
Specifications
Number of Output Points 32 in four 8 point groups
LEDs Active
F
1 ... 32 (Green) - Indicates point status
Required Addressing 2 words out
Output Ratings
ON Level 0.2 Vdc (max) @ 75 mA sinking
OFF Level V
OUT
= U
S
- 1.25 V @ 1 mA source
V
OUT
= 3.2 V (min) @ 1 mA, U
S
= 4.5 V
Internal Pullup Resistor 440 Ω
Maximum Load Current
Each Point 75 mA (sinking)
Each Group 600 mA
Per Module 2.4 A
Surge Current Maximum
Each Point 750 mA @ 500 μs duration (no more than 6 per minute)
Response (Resistive Loads)
OFF - ON 250 μs (max)
ON - OFF 250 μs (max)
Output Protection (internal) Transient voltage suppression
Isolation
Group to Group 500 Vac rms for 1 minute
Output to Bus 1780 Vac rms for 1 minute
Fault Detection Blown fuse detect, loss of field power
Bus Current Required 350 mA
Power Dissipation 4 W
External Power (U
S
) 4.5 ... 5.5 Vdc continuous
Absolute Voltage (U
S
) max 15 Vdc for 1.3 ms decaying voltage pulse
External Power Supply Current 400 mA + Load current per point
Fusing
Internal 1A fuse for each group. Modicon # 043508953. For the
location of the fuses Fuse Locations, p. 666.
External None
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com