Hardware reference guide

I/O Modules

636

35013379 02 October 2007

I/O Map Status

Byte

The I/O map status byte is used by the 140DAO84210 and 140DAO84220 output

modules. The following figure shows I/O map status bytes use.

There is no I/O map status byte associated with the 140DAO84000, 140DAO84010,

140DDO84300, or 140DRA84000 module.

Module Zoom

Selections

Push <Enter> to display and select the output type and the timeout state for the

module. Timeout state is assumed when system control of the module is stopped.

The following figures show the output type and timeout state.

32-Point Output

Modules

The following list shows the 32-point output modules:

z 140DAO85300 (AC Output 230 Vac 4x8 Sink)

z 140DDO15310 (DC Output 5 V 4x8 Sink)

z 140DDO35300 (DC Output 24 Vdc 4x8 Source)

z 140DDO35301 (DC Output 24 Vdc 4x8 Source)

z 140DDO35310 (DC Output 24 Vdc True Low 4x8 Sink)

1234567 10 11 12 13 14 15 1689

For the 140DAO84000, 140DAO84010, 140DAO84210, 140DAO84220, 140DDO84300,

and the 140DRA84000 modules.

Group D fault

Group C fault

Group B fault

Group A fault

BIN

BCD

Last Value

User Defined

Timeout State:

Output Type:

User Defined Timeout State Points 1-16: 0000000000000000

This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com