Hardware reference guide

I/O Modules
35013379 02 October 2007 633
I/O Configuration for Discrete Output Modules
Overview This section provides information on configuration of 8-, 12-, 16-, 32- and 96-point
output modules.
8-Point Output
Modules
The following shows the 8-point output module:
z 140DRC83000 (Relay Ouput 8x1 Normally Open/Normally Closed)
I/O Map Register
Assignment
The ouput modules listed above can be configured as either eight contiguous
discrete output (0x) references or as one output (4x) register. The following figure
shows the format for the output modules.
I/O Map Status
Byte
There is no I/O Map status byte associated with these modules.
Module Zoom
Selections
Push <Enter> to display and select the output type and timeout state for the module.
Timeout state isassumed when system control of the module is stopped.
23456781
Output Type:
Timeout State:
User Defined Timeout State Points 1- 8: 00000000
BIN
BCD
Last Value
User Defined
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com