Hardware reference guide

I/O Modules
35013379 02 October 2007 589
Input to Bus 1780 Vac for 1 minute
Fault Detection Broken wire (4...20 mA mode) or under
voltage range (1...5 V)
Bus Current Required 250 mA
Power Dissipation 10.9 W max
External Power Not required for this module
Fusing
Internal None
External User discretion
Note: Input signals must be sinusoidal with less than 6% THD and 63 Hz maximum
frequency.
Specifications
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com