Hardware reference guide

I/O Modules
35013379 02 October 2007 577
I/O Map Register
Assignment
The input modules listed above can be configured as either 32 contiguous discrete
input (1x) references or as two contiguous input (3x) registers in the following format.
The following figure shows the input points for Register 1 and Register 2.
I/O Map Status
Byte
There is no I/O map status byte associated with these modules.
Modsoft Module
Zoom Selections
Push <Enter> to display and select the input type. This selection appears if the
module is I/O mapped to a 3x register. The following figure shows the input type.
96-Point Input
modules
The following is the only 96 point input module:
z 140DDI36400 - DC input 6 x 16 sink
1234567 10 11 12 13 14 15 1689
17 18 19 20 21 22 23 26 27 28 29 30 31 3224 25
Register 1
Input
Point 1
MSB - First Word
Register 2
Input
Point 17
MSB - Second Word
BIN
BCD
Input Type:
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com