Hardware reference guide

I/O Modules
548
35013379 02 October 2007
I/O Map Status
Byte
The I/O map status is used for the 140ACO13000 output module as follows:
Modsoft Module
Zoom Selections
Push <Enter> to display and select channel ranges and timeout states for each
channel. Time out state is assumed when system control of the module is stopped.
The following figure shows the Channel X timeout state options.
140AVO02000 The following information pertains to configuration of the 140AVO02000 Analog
Output module.
1 2 3 4 5 6 7 8
Channel 2 loop broken wire
Channel 3 loop broken wire
Channel 4 loop broken wire
Channel 1 loop broken wire
Channel 6 loop broken wire
Channel 5 loop broken wire
Channel 7 loop broken wire
Channel 8 loop broken wire
Channel X Range Selection
Channel X User Defined Timeout Value:
0 DEC
Channel X Timeout State
4 to 20 mA 0 to 16,000
4 to 20 mA 0 to 4,095
0 to 20 mA 0 to 20,000
0 to 25 mA 0 to 25,000
Minimum Output
Last Value
User Defined
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com