Hardware reference guide

I/O Modules
518
35013379 02 October 2007
Note:
1. Open Circuit Detect is always enabled for all TC types and may be disabled for
linear ranges.
2. On millivolt ranges, if Open Circuit Detect is enabled, this bit is set on Open
Circuit Detect or input FFFFh
3. Data format changes to unsigned if the output is requested in units of 0.1° F to
accommodate readings above 3276.8° F.
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com