Hardware reference guide

I/O Modules

35013379 02 October 2007 505

Table/Module

Configuration

The following figure shows the table/module configuration.

Given the above sample configuration, if you select 300001 as the starting address

of the status table and there are no I/O modules in the first two locations, the first

I/O module status is found in the least significant byte of the second word

(i.e., position 3). The table fills until the last I/O mapped module is found.

Note: The bit pattern reported in each status/error byte is dependent on the module

type.

I/O

Slot 2 Slot 1

I/O B I/O A

300001

300003

Slot 4 Slot 3

Slot 6 Slot 5

Slot

1234 56

300002

I/O C

This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com