Hardware reference guide

Network Configurations
46
35013379 02 October 2007
Hot Standby
Data
Communica-
tions Support
YYNYNNN N N N
Optional Dual
Cabling
N Y NNNN N N N
Optional
Fiber Optics
YYY N
Momentum
I/O Drops
N N NNNY N N Y
Variable
Speed Drives
NNNN N Y
Servo Motion
Control
NNNNN YY
HMI: Displays
& Panels
YYNNN NN
HMI: Work-
stations
YNYYN NN
1. Refer to the Modbus Plus portion of the Quantum Specifier's guide section for details of available services on
140NOM2XXX00 Modbus Plus Network modules
2. Service is only available on the native controller Modbus port when the XMIT loadable is used.
3. Available from third parties.
4. The SERCOS network standard is fiber optics.
5. The software for this module is a modConnect product.
6. Module firmware loaded through serial port on module.
Service
Description
Modbus Modbus
Plus
Remote
I/O
Ethernet Interbus LonWorks SERCOS Profibus
TCP/
IP
SY/
MAX
MMS
Y
1
Y
3
Y
1
Y
5
Y
3
Y
4
Y
4
Y
1
Y
3
Y
1
Y
3
Y
4
Y
1
Y
3
Y
4
Y
1
Y
3
Y
4
Y
1
Y
35,
Y
4
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com