Hardware reference guide

Intrinsically Safe Modules
35013379 02 October 2007 429
140AIO33000 The following information pertains to configuration of the 140AIO33000 intrinsic safe
analog output module.
I/O Register
Assignments
The 140AIO33000 module requires eight contiguous output (4x) registers assigned
as follows:
I/O Map Status
Byte
The I/O map status byte for this module is as follows.
Register 1 Channel 1 data
Register 2 Channel 2 data
Register 3 Channel 3 data
Register 4 Channel 4 data
Register 5 Channel 5 data
Register 6 Channel 6 data
Register 8 Channel 8 data
Register 7 Channel 7 data
12345678
Channel 1 loop broken wire (4 ... 20 mA)
Channel 2 loop broken wire (4 ... 20 mA)
Channel 3 loop broken wire (4 ... 20 mA)
Channel 4 loop broken wire (4 ... 20 mA)
Channel 5 loop broken wire (4 ... 20 mA)
Channel 6 loop broken wire (4 ... 20 mA)
Channel 7 loop broken wire (4 ... 20 mA)
Channel 8 loop broken wire (4 ... 20 mA)
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com