Hardware reference guide

Intelligent/Special Purpose
370
35013379 02 October 2007
Module Zoom
Selections
Push <Enter> to display and select applicable parameters.
The following figure shows the module zoom selections.
The next lines apply ONLY IF the counter is in 2x16, Output Assert Mode:
Counter X Maximum Count: * 0 DEC
Counter X Setpoint (alarm): * 0 DEC
Time Output On: 0 DEC milliseconds (16383 maximum)
Terminal Count
Latched Terminal
Timed Setpoint
Timed Terminal
Counter X output mode
Output Coil X mode:
2x16 Assert Outp
2x32 Assert Outp
2x32 No Assert
Rate Sample Mode
Number of counters, output assertion:
Setpoint
Latched Setpoint
Off
On
Comm lost output assert override:
2x16 w/ Output
2x32 w/ Output
2x32 No Output
Rate Sample Mode
Number of counters, output assertion:
Incremental
Quadrature
Counter X mode control:
Note: When OFF, outputs are
disabled when communication
with the bus is lost. When ON,
outputs continue to operate as
configured.
Note: Only one output
should be configured
as timed (Setpoint or
Terminal).
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com