Hardware reference guide

Intelligent/Special Purpose
350
35013379 02 October 2007
If configured for Rate Sample Mode, the following figures, which show the 4X
through 4X+2 counters, are displayed.
Note: Zero set into any 4X register or any 4X register pair for 32 bit values means
no change.
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
4X
1 = Preset Counter 1
1 = Enable Counter 1
1 = Disable Counter 1
1 = Preset Counter 2
1 = Enable Counter 2
1 = Disable Counter 2
Load Values Command
Bit
Rate Sample Timer Value, Counter 1 (milliseconds, max = 3FFF hex)
16151413121110987654321
4X+1
Rate Sample Timer Value, Counter 2 (milliseconds, max = 3FFF hex)
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
4X+2
Configured for Rate Sample Mode
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com