Hardware reference guide

Ethernet Modules
322
35013379 02 October 2007
Specifications The main specifications for the Quantum 140NOE771xx Ethernet Modules are
described in the following table
Specifications
Communication Ports One auto-sensing 10/100Base-T shielded twisted
pair (RJ-45 connector) port and one 100Base-FX
(MT-RJ connector) port. Both ports transmit and
receive Modbus commands encapsulated in TCP/IP
protocol. Only one port can be used at a time.
Bus Current Required 750 mA
Power Dissipation 3.8 W
Fuse None
Programming Software
Type and version Concept, Ver. 2.2 or higher (NOE77100/10)
Concept, Ver 2.5 or higher (NOE77101/11)
Modsoft, Ver. 2.6 or higher (NOE77100/10)
ProWORX NxT, Ver 2.1 or higher (NOE77100/10)
ProWORX NxT, Ver 2.2 or higher (NOE77101/11)
Firmware
CPU Type and version Quantum Executive, Ver. 2.0, or higher
NOE Upgradeable Field Upgradeable via FTP or Programming Panel.
Operating Conditions
Temperature 0 to +60° C
Humidity 0 to 95% Rh non-condensing @ 60° C
Altitude 15,000 ft (4500 m)
Vibration 10-57 Hz @ 0.0075 mm d.a
57-150 Hz @ 1 g
Storage Conditions
Temperature -40 to +85°C
Humidity 0 to 95% Rh non condensing @ 60°C
Free Fall 1 m unpackaged
Shock 3 shocks / axis, 15 g, 11 ms
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com