Hardware reference guide

Networking
35013379 02 October 2007 271
Specifications The following table shows the specifications for the Remote I/O Head Single and
Dual Channel modules.
Specifications
Drop Type Quantum, 200 Series, 500 Series, 800 Series, or SY/MAX (any mix)
Drops 31 max
Words/Drop 64 In / 64 Out
ASCII 2 ports/drop, 32 ports (16 drops) max
Requires the use of AS-P892-000, AS-J892-101/102, or
AS-J290-0X0 at the RIO drops.
Coax Termination Internal 75Ω
Coax Shield Tied to chassis ground
Data Transfer Rate 1.544 mb
Dynamic Range 35 dB
Isolation 500 Vdc coaxial cable center conductor to ground
External Connections
One Channel
(CRP93100)
One "F" type female connector with a right angle adapter
Two Channels
(CRP93200)
Two "F" type female connectors with a right angle adapter
General
Diagnostics Power Up Power Up and Runtime
Dual Port Memory Check Executive Checksum
LAN Controller Check RAM Address/Data
Maximum Number of
CRPs Supported by
the Controller
1
Bus Current Required
(Typical)
Single Channel: 600 mA
Dual Channel: 750 mA
Power Dissipation
(Typical)
Single Channel: 3 W
Dual Channel: 3.8 W
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com