Hardware reference guide

CPU Modules
132
35013379 02 October 2007
LED Error Codes The LED Error Codes table shows the number of times the Run LED blinks for each
type of error and the crash codes possible for that group (all codes are in hex). The
following table shows the blinking run LED error codes.
LED Error Codes
Number of Blinks Code Error
Continuous 0000 requested kernel mode
2 80B ram error during sizing
80C run output active failed
82E MB command handler stack error
3 769 bus grant received
72A not master asic on cpu
72B master config write bad
72C quantum bus DPM write failure
72F plc asic loopback test
730 plc asic BAD_DATA
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com