Technical information

30 31
www.netbiter.com www.netbiter.com
Remotely connect to your Rockwell equipment in less
than 10 minutes with Remote Access!
Save time, save energy, save resources!™
Netbiter
®
system overview
1. Secure hosting via Netbiter Argos
2. Argos cloud based management services
3. Device connectivity via Netbiter gateways
Netbiter
®
Remote Access Netbiter
®
Remote Access
Use your Rockwell soware tools remotely just as if you
were on site. With a Netbiter gateway connected to your
Rockwell PLC or machine, you can do programming or
debugging from any locaon using RSLogix Designer,
RSNetworx or RSLinx.
Just like being on site!
“Remote Access” is a feature within the Netbiter Remote
Management soluon which allows you to open up a secure
connecon to remote machinery and devices. Through
this connecon, it is possible to do remote conguraon,
programming or debugging of your own device from any
locaon. Once the communicaon tunnel is open, you use your
standard conguraon soware to congure the PLC or device.
How it works
On your computer, you run the Netbiter QuickConnect soware
and a secure tunnel is created to the Netbiter gateway which
is connected to the remote device. You can then simply open
RSLogix or RSLinx and congure or debug just as if you were on
site.
The connecon is established via Netbiter Argos in the cloud
(www.netbiter.net) which acts as a roung portal. A Netbiter
gateway registers at the Netbiter Argos cloud portal at power-
up and establishes a remote connecon without the need for
opening inbound ports in rewalls or seng up VPN connecons
on site. The result is a secure connecon which is set up a maer
of minutes.
Enable Remote Access inside Netbiter Argos.
Enter the IP address of your remote machine or PLC.
Open RSLogix and congure as usual.
View video:
Setup in 7:04
See the full process from connecng the Netbiter to the
PLC, etablishing the connecon and conguring the PLC.
hps://www.youtube.com/watch?v=okz4UdZ8MHI
Solid security
Security together with ease-of-use are the two
main traits of Netbiter Remote Access. Data
is encrypted both to and from Netbiter Argos
and you can also choose a two-step vericaon
method (you log in with a password and
also get an SMS to verify your identy). This
ensures secure data connecon to your remote
equipment.
Is your device ready for
Remote Access?
Almost any device can be connected to
Netbiter Remote Access. A list of veried
devices can be found on netbiter.com
and HMS can assist you in testing and
veriying your particular device.