Datasheet
71
15
r
1
h2h1
r
2
Conguration of the Base Structure
15.1 / 15.2 / 15.3 Conguration of the Base Structure
15.3 Reference Height and Corner Radii
Observance of the following height specifications for the reference surfaces
guarantees secure absorption of force and sufficient clearance for the carriages.
The carriages and guide rails feature a chamfer on the edges of the reference
surfaces. The corner radii specified in the following tables are maximum values
which ensure that carriages and guide railscontact the mounting surfaces
correctly.
The reference side of the carriage is opposite the carriage side with the company
logo / type designation. The guideway can be located on both sides.
The dimensions listed for the reference surface should be applied to ensure optimal
alignment of the guideway and an easy installation.
MINIRAIL and MINISCALE PLUS
Rail length h1 r1max r2max h2
7 1.2 0.2 0.3 2.5
9 1.5 0.3 0.4 3
12 2.5 0.4 0.4 4
15 3.5 0.5 0.5 5
14 1.8 0.2 0.4 2
18 3 0.3 0.5 3
24 3.5 0.4 0.5 4
42 3.5 0.5 0.6 5
MINISLIDE
Rail length h1 r1max r2max h2
4 0.2 0.1 0.1 1.2
5 0.4 0.2 0.1 1.8
7 1.0 0.2 0.3 2.5
9 1.5 0.3 0.4 3
12 2.5 0.4 0.4 4
15 3.0 0.5 0.5 5