Datasheet
61
13
B2
A: ± 0.02 mm
B
2: ± 0.02 mm
A
MINISLIDE Frictionless Table Product Overview
13.3 MINISLIDE Product Overview
13.3.5 Tolerance of the Total Height
13.3.6 Push Force and Preload
The push force is influenced by the preload and the lubricant used. MINISLIDE
guideways are delivered with zero backlash and slightly preloaded as standard.
The carriages can be delivered with a defined push force on request (see chapter
14.1).
13.3.7 Friction and Smoothness
SCHNEEBERGER places high value on smoothnessduring manufacturing. The
accuracy of the surfaces and materials is of the highest priority. This also applies
with respect to the rolling elements used, which must satisfy the most stringent
quality demands. Under normal operating conditions a coefficient of friction of
0.003 can be assumed.