Datasheet

59
13
MINISLIDE Frictionless Table Product Overview
13.2 / 13.3 MINISLIDE Product Overview
13.3 Technical Information and Alternative Variants
13.3.1 MINISLIDE MS Performance Parameters
Max. acceleration 50 m/s
2
Max. speed 1 m/s
Preload Zero backlash
Accuracy See chapters 13.3.4 and 13.3.5
Materials
- guideways, carriages, ball bearings
- cage
Stainless, through-hardened steel
POM
Areas of application
- temperature range
(1)
- vacuum
(2)
- humidity
- cleanroom
-40° C to +80° C (-40° F to +176° F)
Vacuum (max. 10
-7
mbar)
10 % – 70 % (non-condensing)
Cleanroom class ISO 7 or ISO 6
(in accordance with ISO 14644-1)
(1)
The standard lubrication covers a temperature range from -20° C to +80° C.
Lubricants for other temperatures are available on request from SCHNEEBERGER.
(2)
The suitability for a vacuum depends on the materials used. Use in a vacuum
requires a special lubricant which can be requested from SCHNEEBERGER.
So that no air remains trapped in the blind holes, the fastening screws must be
vented.
13.3.2 MINISLIDE MSQ Performance Parameters
Max. acceleration 300 m/s
2
Max. speed 3 m/s
Preload Zero backlash
Accuracy See chapters 13.3.4 and 13.3.5
Materials
- guideways, carriages, ball bearings
- cage and pinion
- end pieces
Stainless, through-hardened steel
PEEK
PEEK
Areas of application
- temperature range
(1)
- vacuum
(2)
- humidity
- cleanroom
-40° C to +150° C (-40° F to +302° F)
Vacuum (max. 10
-9
mbar)
10 % – 70 % (non-condensing)
Cleanroom class ISO 7 or ISO 6
(in accordance with ISO 14644-1)
(1)
The standard lubrication covers a temperature range from -30° C to +120° C.
Lubricants for other temperatures are available on request from SCHNEEBERGER.
(2)
The suitability for a vacuum depends on the materials used. In order to use MSQ
in a vacuum, the fastening screws must be removed from the front plates.
Use in a vacuum requires a special lubricant which can be requested from
SCHNEEBERGER. So that no air remains trapped in the blind holes, the
fastening screws must be vented.