Datasheet

2.3V

100μm

0.5V

≈100 μm

MINISCALE PLUS Product Overview

Single-ended Signals

Analog Interface Module Output

Differential Signals

Reference point

Sine

Cosine

Reference

10.2.3 Signal Processing

Further information about signal processing is available from the downloadsection

of our website www.schneeberger.com.

Analog output format:

Differential, sin/cos analog signals with reference pulse 1 Vpp (at 100 Ω).

The incremental signals sine and cosine are shifted 90° and correlated with the

markings on theencoded scale. An electrical signal period (360°) corresponds

precisely to the scale increment of the dimensional scale, which is 100 µm.

The reference pulse always marks electronically the same section of the path of the

sine and cosine signals. The point of intersection of the two signals within the

reference pulse therefore marks a precisely defined position on the dimensional

scale.

The sine signal either lags behind the cosine signal or occurs before it, depending

on the direction of movement.