Datasheet

15
6
Special Requirements
5 / 6.1 / 6.2 / 6.3 / 6.4 Special Requirements
MINI-X can be operated in different temperature ranges. SCHNEEBERGER can
deliver guideways with application-specific lubricants on request.
Operating temperature
MINIRAIL -40° C to + 80° C (higher temperatures on request)
MINISCALE PLUS -40° C to + 80° C
MINISLIDE MS -40° C to + 80° C
MINISLIDE MSQ -40° C to + 150° C
6.2 Speeds and Acceleration
MINI-X are equipped for the following speeds and acceleration:
max. speed max. acceleration
MINIRAIL 5 m/s 300 m/s
2
MINISCALE PLUS 5 m/s 300 m/s
2
MINISLIDE MS 1 m/s 50 m/s
2
MINISLIDE MSQ 3 m/s 300 m/s
2
6.3 Cleanroom
In the cleanroom, it is necessary to reduce the number of particles as well as apply
appropriate types of lubricating grease. SCHNEEBERGER delivers guideways for
cleanroom classes up to ISO 6 on request. The guideways are packaged
appropriately and lubricated according to requirements.
6.4 Vacuum
Corrosion resistant guideways are preferred for use in a vacuum. It is also
necessary to avoid out-gassing of plastics, to ensure vented of attachment holes
and to use an appropriate lubricant.
On request, SCHNEEBERGER can deliver the guideways packaged in a cleanroom
and lubricated according to requirements.
Vacuum ranges for standard MINI-X products:
MINIRAIL
10
-7
mbar (HV). 10
-9
mbar (UHV) on request. The values apply without wipers
MINISCALE PLUS
On request
MINISLIDE MS
10
-7
mbar (HV)
MINISLIDE MSQ
10
-9
mbar (UHV)
Notes: the suitability for a vacuum depends on the materials used.
6.1 Temperature Range