Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
8-46
Revision: 2012-02-29
1. Click 'OK'. The 'Edit Device Traffic Shaping' screen appears.
Figure 8-46: Edit Device Traffic Shaping
8.3.4.3 Tx Traffic Shaping
The bandwidth of a device can be divided in order to reserve constant portions of
bandwidth to predefined traffic types. Such a portion is known as a Shaping Class.
When not used by its predefined traffic type, or owner (for example VoIP), the class
will be available to all other traffic. However when needed, the entire class is re-
served solely for its owner. Moreover, you can limit the maximum bandwidth that a
class can use even if the entire bandwidth is available.
Configure the following fields:
 Tx Bandwidth This parameter limits the gateway's bandwidth transmission
rate. The purpose is to limit the bandwidth of the WAN device to that of the
weakest outbound link, for instance, the SHDSL connection speed.