Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
8-42
Revision: 2012-02-29
2. After choosing the traffic direction and the device on which to set the rule,
click the appropriate 'New Entry' link. The 'Add Traffic Priority Rule' screen
appears.
Figure 8-42: Add Traffic Priority Rule
This screen is divided into two main sections, 'Matching' and 'Operation', which are
for defining the operation to be executed when matching conditions apply.
Matching Use this section to define characteristics of the packets matching the
rule.
 Source Address The source address of packets sent or received by
Watson. The drop-down menu displays the names or IP addresses of the hosts
currently connected to Watson's LAN, as well as the options 'Any' and 'User
Defined'. Select an address or name from the list to apply the rule on the corre-
sponding host, or 'Any' to apply the rule on all Watson's LAN hosts. If you
would like to add a new address, select the 'User Defined' option in the drop-
down menu. This will commence a sequence that will add a new network ob-
ject, representing the new host. Refer to Section 9.9.2 in order to learn how to
do so.
 Destination Address The destination address of packets sent or received by
Watson. This address can be configured in the same manner as the source
address. This entry enables further filtration of the packets.
 Protocol You may also specify a traffic protocol. Selecting the 'Show All
Services' option from the drop-down menu will expand the list of available pro-
tocols. Select a protocol or add a new one using the 'User Defined' option. This
will commence a sequence that will add a new service, representing the proto-
col. Refer to Section 9.9.1 in order to learn how to do so.