Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
8-38
Revision: 2012-02-29
8.3.2.1 Application View
By default, the information is presented in "By Application" view. The screen re-
freshes constantly. You can stop its refreshing by using the 'Auto Refresh Off' but-
ton at the bottom of the screen.
Figure 8-38: Internet Connection Utilization by Application
The table displays the following information fields. Note that you can sort the table
according to these fields (ascending or descending), by clicking the fields' names.
Application The type of application using the bandwidth.
Protocol The application's network protocol.
Port The port through which traffic is transferred.
Tx Throughput The transmission bit rate in kilo-bits per second.
Rx Throughput The reception bit rate in kilo-bits per second.
Watson does not recognize all possible applications running on LAN computers,
and marks such an application as "Unknown". You can define an unknown applica-
tion by clicking the 'Click Here to Add a New Application Definition' link at the bot-
tom of the table. The 'Protocols' screen appears, in which you can define the appli-
cation by adding it as a new service entry. To learn more about adding protocols,
refer to Section 9.9.1.
Furthermore, you can click each application's name to view its details, particularly
which LAN computer is running it.
Figure 8-39: A Specific Application