Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
8-28
Revision: 2012-02-29
will commence a sequence that will add a new Service, representing the proto-
col. Refer to Section 9.9.2 in order to learn how to do so.
Operation Define which ALG will be used, by selecting one from the designated
drop-down menu.
Logging Monitor the rule.
 Log Packets Matched by This Rule Select this check box to log the first packet
from a connection that was matched by this rule.
Schedule By default, the rule will always be active. However, you can configure
scheduler rules by selecting 'User Defined', in order to define time segments during
which the rule may be active. After more than one scheduler rule is defined, the
'Schedule' drop-down menu will allow you to choose between the available rules.
To learn how to configure scheduler rules, refer to Section 9.9.3
Note: The defined ALG rule will also be applied to the child processes of the appli-
cation that utilizes the selected protocol.
The order of the rules' appearance represents both the order in which they were
defined and the sequence by which they will be applied. You may change this order
after your rules are already defined (without having to delete and then re-add
them), by using the action icon and action icon .
8.2.10 Log
The 'Security Log' screen displays a list of firewall-related events, including at-
tempts to establish inbound and outbound connections, attempts to authenticate
through an administrative interface (WBM or Telnet terminal), firewall configuration
and system start-up. To view the firewall log, click the 'Log' tab in the 'Firewall'
management screen. The 'Log' screen appears.
Figure 8-33: Firewall Log
The log's columns are:
Time The time the event occurred.