Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
8-24
Revision: 2012-02-29
To view Watson's advanced filtering options, click 'Advanced Filtering' under the
'Firewall' tab in the 'Services' screen. The 'Advanced Filtering' screen appears:
Figure 8-29: Advanced Filtering
8.2.9.1 Adding Input and Output Rules
The first two sections of the 'Advanced Filtering' screen—'Input Rule Sets' and
'Output Rule Sets', are designed for configuring inbound and outbound traffic re-
spectively. Each section is comprised of subsets, which can be grouped into three
main subjects:
 Initial rules - rules defined here will be applied first, on all gateway devices.
 Network devices rules - rules can be defined per each gateway device.
 Final rules - rules defined here will be applied last, on all gateway devices.
The order of the rules' appearance represents both the order in which they were
defined and the sequence by which they will be applied. You may change this order
after your rules are already defined (without having to delete and then re-add
them), by using the action icon and action icon .