Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
8-21
1. Select the 'NAPT' option in the 'Operation' section combo box. The screen will
refresh:
Figure 8-25: Add NAPT Rule
2. Add a NAPT address by selecting the 'User Defined' option.
3. Enter 1024-1050 as the range of ports in the 'NAPT Ports' section.
4. Click 'OK' to save the settings.
The rule will be displayed in the 'NAT' screen:
Figure 8-26: NAT/NAPT Rule Sets
This rule translates a LAN IP address to a NAT IP address with specific ports. Its
status is set to "Active".