Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
6-3
Power Backoff Select ‗on‘ or ‗off‘. Default is ‗off‘. For short distances you can
turn it on to reduce the transmitted power.
Clock Mode To connect to other Schmid Telecom Watson devices use the
default clock mode ‗1‘. If needed, choose another clock mode when connected to
an SHDSL EFM device from another manufacturer.
WAN Ethernet Connection Type Select your WAN connection type according to
the method by which you are connected to the Internet. Each option in this drop-
down menu is described thoroughly in Section 5.4.1.
Click the 'Click here for Advanced Settings' link to navigate to your WAN con-
nection's properties page. The 'WAN Ethernet Properties' screen appears.
Figure 6-3: WAN Ethernet Properties
This screen provides all the configuration options for your WAN connection. For
more information, refer to Section 9.4.3.