Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
6-2
Revision: 2012-02-29
6.2 Settings
The 'Settings' screen provides basic configuration options for the SHDSL modem
and for the different types of Internet connections supported by Watson.
Figure 6-2: Internet Connection – Settings
Ethernet Encapsulation (TC Flow) Select either ‘EFM‘ or ‘HDLC‘ encapsu-
lation. ‗HDLC‘ encapsulation should be selected when the Watson SHDSL router is
connected to a another Watson modem supporting ‗HDLC‘ encapsulation. ‗EFM‘
should be selected when two Watson SHDSL routers are connected point-to-point
together or when the Watson SHDSL router is connected to another SHDSL EFM
compatible device.
DSL Master (Sub Type) Select ‗off (STU-R)‘ or ‗on (STU-C)‘. If two Watson
SHDSL router are connected point-to-point, one device has to be set to ‗off‘ and the
other device has to be set to ‗on‘. Use ‗off (STU-R)‘ when the Watson SHDSL rout-
er is connected to a Watson Ethernet plug-in (SZ.866.V654) [2]. Some DSL port
settings are only visible when DSL Master is ‗on (STU-C)‘.
Admin State Select ‗up‘ or ‗down‘. Allows to block certain ports and alarms.
Line Rate [kb/s] Enter the line rate of the ports.
Constellation Select ‗pam16‘ or ‗pam32‘ or ‗pam64‘ or ‗pam128‘ .