Technical information

Watson-SHDSL-Router-GUI-Manual.doc

Version 2.3-03

Watson SHDSL Router

Web-based Management Manual

Revision: 2012-02-29

5-7

5.4.1.2 Automatic IP Address Ethernet Connection

Select 'Automatic IP Address Ethernet Connection' from the 'Connection Type'

combo-box (see Figure 5-9). Watson will obtain the WAN IP and DNS IP addresses

from a DHCP server on the WAN.

Figure 5-9: Internet Connection - Automatic IP Address Ethernet Connection

5.4.1.3 Point-to-Point Tunneling Protocol (PPTP)

Select 'Point-to-Point Tunneling Protocol (PPTP)' from the 'Connection Type' com-

bo box:

Figure 5-10: Internet Connection - PPTP

Configure the following parameters according to your ISP information:

 PPTP Server Host Name or IP Address

 Login User Name

 Login Password

Select the Internet Protocol: Most Internet Service Providers (ISPs) provide dynam-

ic IP addresses, hence the default "Obtain an IP Address Automatically". Should

this not be the case, select the "Use the Following IP Address" option. The screen

refreshes. Enter the IP Address, Subnet Mask, and Default Gateway provided to

you by your ISP.