Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
5-4
Revision: 2012-02-29
Figure 5-5: Test Internet Connection – Failure
In this case, you can manually set the Internet connection type, by clicking the cor-
responding button.
To learn about manually configuring your Internet connection, refer to Section
5.4.1.
5.3.2 Step 2: Setup Internet Connection
If your Internet connection requires login details provided by your Internet Service
Provider (ISP) (e.g. when using PPPoE), enter your user name and password.
Failure to enter the correct details yields an error message. Click 'Back' and try
again.
5.3.3 Step 3: Test Service Provider Connection
This step tests the connectivity to your ISP.
5.3.4 Step 4: Test Internet Connection
This step tests the connectivity to the Internet.
5.3.5 Step 5: Installation Completed
This screen provides a summary of all the above Internet connection configuration
steps and their results. Click 'Finish' to complete the wizard procedure.
5.4 Quick Setup
'Quick Setup' enables speedy and accurate configuration of your Internet connec-
tion and other important parameters. The following sections describe these various
configuration parameters. Whether you configure these parameters or use the de-
fault ones, click 'OK' to enable your Internet connection.