Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
10-2
Revision: 2012-02-29
BGP OSPF – Manage BGP and OSPF configuration. This icon redirects to the 'Routing‘ tab
under 'System' (refer to Section 9.6.2).
CPU Monitor – View Watson CPU load and running processes. This icon redirects to the
'Monitor' tab under 'System' (refer to Section 9.5.2).
Certificates – Manage digital certificates. This icon redirects to the 'Objects and Rules' tab
under 'System' (refer to Section 9.9.4).
Configuration File – View, save and load the configuration file. This icon redirects to the
'Maintenance' tab under 'System' (refer to Section 9.8.2).
DNS Server – View and modify the DNS hosts table. This icon redirects to the 'Advanced'
tab under 'Services' (refer to Section 8.6.1).
Diagnostics – Perform networking diagnostics. This icon redirects to the 'Maintenance' tab
under 'System' (refer to Section 9.8.8).
Firewall – Configure the gateway‘s firewall. This icon redirects to the 'Firewall' tab under
'Services‘ (refer to Section 8.2.1).
Firmware Upgrade – Upgrade Watson's software image. This icon redirects to the 'Mainte-
nance' tab under 'System' (refer to Section 0).
IP Address Distribution – Modify the behavior of the DHCP server for each LAN/WAN de-
vice and view a list of DHCP clients in the local network. This icon redirects to the 'IP Ad-
dress Distribution' tab under 'Services' (refer to Section 8.6.2).
IPSec – Configure Internet protocol security parameters. This icon redirects to the 'VPN' tab
under 'Services' (refer to Section 8.4.1).
Installation Wizard – Step-by-step procedure that guides you through establishing an Inter-
net connection. This icon redirects to the 'Installation Wizard' tab under 'Home' (refer to Sec-
tion 5.3).
MAC Cloning – Clone your PC's MAC address. This icon redirects to the 'Maintenance' tab
under 'System' (refer to Section 9.8.7).
Map View – Depicts the various network elements. This icon redirects to the 'Map View' tab
under 'Home' (refer to Section 5.2).
Network Monitor – View network connection data. This icon redirects to the 'Monitor' tab
under 'System' (refer to Section 9.5.2).
Network Objects – Define groups of LAN devices for system rules. This icon redirects to
the 'Objects and Rules' tab under 'System' (refer to Section 9.9.2).
PPPoE Relay – Enable PPPoE relay on Watson. This icon redirects to the 'Routing' tab un-
der 'System' (refer to Section 9.6.3).
PPTP Server – Configure point-to-point tunneling protocol parameters. This icon redirects to
the 'VPN' tab under 'Services' (refer to Section 8.4.2).