Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
9-4
Revision: 2012-02-29
9.8.8.1 Diagnosing Network Connectivity
To diagnose network connectivity, perform the following steps:
1. Under the Ping section, enter the IP address or URL to be tested in the 'Destina-
tion' field.
2. Enter the number of pings you would like to perform.
3. Press the 'Go' button.
4. In a few seconds, diagnostic statistics will be displayed. If no new information is
displayed, press the 'Refresh' button.
9.8.8.2 Performing a Traceroute
To perform a traceroute, follow these steps:
1. Under the Traceroute section, enter the IP address or URL to be tested in the
'Destination' field.
2. Press the 'Go' button. A traceroute will commence, constantly refreshing the
screen.
3. To stop the trace and view the results, press 'Cancel'.