Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
9-106
Revision: 2012-02-29
13. Complete the fields as indicated in the window.
14. Click 'OK' to close the window and return to the 'Advanced Settings' window.
The service will be selected.
15. Click 'OK' to save the settings.
9.7.1.2 UPnP Configuration
The UPnP feature is enabled by default. Access its settings either from the 'Man-
agement' tab under the 'System' screen, or by clicking the 'Universal Plug and Play'
icon in the 'Advanced' screen. The 'Universal Plug and Play' settings screen ap-
pears:
Figure 9-161: Universal Plug and Play
Allow Other Network Users to Control Watson's Network Features Select this
check-box to enable the UPnP feature. This will enable you to define UPnP ser-
vices on any of the LAN hosts.
Enable Automatic Cleanup of Old Unused UPnP Services Select this check-
box to enable automatic cleanup of invalid rules. This feature checks the validity of
all UPnP services every 5 minutes, and removes old and obsolete services, unless
a user-defined rule depends on them (see Section 8.2).
WAN Connection Publication By default, Watson will publish only its main
WAN connection, which will be controllable by UPnP entities. However, you may
select the 'Publish All WAN Connections' option if you wish to grant UPnP control
over all of Watson's WAN connections.
9.7.2 Simple Network Management Protocol
Simple Network Management Protocol (SNMP) enables network management sys-
tems to remotely configure and monitor Watson. Your Internet Service Provider
(ISP) may use SNMP in order to identify and resolve technical problems. Technical
information regarding the properties of Watson's SNMP agent should be provided
by your ISP. To configure Watson's SNMP agent, perform the following: