Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
9-86
Revision: 2012-02-29
6. Enter the IP address and subnet mask of the remote network that will be ac-
cessed via the tunnel, and click Next. The 'Connection Summary' screen ap-
pears:
Figure 9-136: Connection Summary
7. Select the 'Edit the Connection' check box if you wish to be routed to the WAN
IPIP Properties screen after clicking 'Finish'. This screen is described later in this
chapter.
8. Click Finish to save the settings.
The new IPIP tunnel will be added to the network connections list, and will be con-
figurable like any other connection.