Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
9-81
6. Check the 'Edit the Newly Created Connection' check box and click Finish. The
'Point-to-Point Tunneling Protocol Server (PPTP Server)' screen appears:
Figure 9-130: Advanced PPTP Server Parameters
7. Click the 'Click Here to Create VPN Users' link to define remote users that will be
granted access to your home network. Refer to Section 9.3 to learn how to de-
fine and configure users.
8. Click 'OK' to save the settings.
The new PPTP Server will be added to the network connections list, and will be
configurable like any connection. Unlike other connections, it is also accessible via
the Watson's 'Advanced' screen. To learn more about the configuration of a PPTP
server, please refer to Section 8.4.2.
9.4.14 Internet Protocol Security (IPSec)
Internet Protocol Security (IPSec) is a series of guidelines for the protection of In-
ternet Protocol (IP) communications. It specifies procedures for securing private in-
formation transmitted over public networks.
To create a new IPSec connection, perform the following steps:
1. In the 'Network Connections' screen (see Figure 9-11), click the 'New Connec-
tion' link. The 'Connection Wizard' screen appears (see Figure 9-12).