Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
9-73
7. Select the 'Edit the Newly Created Connection' check box if you wish to be rout-
ed to the PPTP VPN Properties screen after clicking 'Finish'. This screen is de-
scribed later in this chapter.
8. Click 'Finish' to save the settings.
The new PPTP VPN connection is added to the network connections list, and is
configurable like any other connection.
9.4.12.3 General
To view and edit the PPTP connection settings, click the 'PPTP' link in the 'Network
Connections' screen (see Figure 9-11). The 'PPTP Properties' screen appears, dis-
playing a detailed summary of the connection's parameters, under the 'General'
tab. These parameters can be edited in the rest of the screen's tabs, as described
in the following sections.
Figure 9-115: PPTP Properties
9.4.12.4 Settings
This section displays the connection's general parameters.
Figure 9-116: General PPTP Settings
Schedule By default, the connection will always be active. However, you can
configure scheduler rules in order to define time segments during which the con-
nection may be active. Once a scheduler rule(s) is defined, the drop-down menu