Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
9-72
Revision: 2012-02-29
9.4.12.2 Creating a PPTP VPN connection with the Connection Wizard
To create a new PPTP VPN connection, perform the following steps:
1. In the 'Network Connections' screen (see Figure 9-11), click the 'New Connec-
tion' link. The 'Connection Wizard' screen appears (see Figure 9-12).
2. Select the 'Advanced Connection' radio button and click 'Next'. The 'Advanced
Connection' screen appears (see Figure 9-15).
3. Select the 'Point-To-Point Tunneling Protocol Virtual Private Network (PPTP
VPN)' radio button and click Next. The 'Point-to-Point Tunneling Protocol Virtual
Private Network (PPTP VPN)' screen appears.
Figure 9-113: PPTP VPN
4. Enter the remote tunnel endpoint address. This would be the IP address or do-
main name of the remote network computer, which serves as the tunnel's end-
point.
5. Enter the username and password provided by the administrator of the network
you are trying to access.
6. Click 'Next'. The 'Connection Summary' screen appear.
Figure 9-114: Connection Summary