Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
9-71
3. Select the 'Point-To-Point Tunneling Protocol (PPTP)' radio button and click
Next. The 'Point-to-Point Tunneling Protocol (PPTP)' screen appears.
Figure 9-111: Point-to-Point Tunneling Protocol
4. Enter the PPTP server host name or IP address provided by your ISP.
5. Enter the username and password provided by your Internet Service Provider
(ISP).
6. Click 'Next'. The 'Connection Summary' screen appears.
Figure 9-112: Connection Summary
7. Select the 'Edit the Newly Created Connection' check box if you wish to be rout-
ed to the PPTP Properties screen after clicking 'Finish'. This screen is described
later in this chapter.
8. Click Finish to save the settings.
The new PPTP connection is added to the network connections list, and is configu-
rable like any other connection.