Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
9-69
Use the Following IP Address Your connection can be configured us-
ing a permanent (static) IP address. Your service provider should provide you
with such an IP address and subnet mask.
Figure 9-105: Internet Protocol – Static IP
9.4.11.4 Advanced
Internet Connection Firewall Your gateway's firewall helps protect your com-
puter by preventing unauthorized users from gaining access to it through a network
such as the Internet. The firewall can be activated per network connection. To ena-
ble the firewall on this network connection, select the 'Enabled' check box. To learn
more about your gateway's security features, refer to Section 8.2.
Figure 9-106: Internet Connection Firewall
Additional IP Addresses You can add alias names (additional IP ad-
dresses) to the gateway by clicking the 'New IP Address' link. This enables you to
access the gateway using these aliases in addition to the 192.168.1.1 .
Figure 9-107: Additional IP Addresses
9.4.11.5 DSCP Remark According to 802.1p CoS
When creating a VLAN interface over a LAN connection, it is possible to determine
the IP header's Differentiated Services Code Point (DSCP) priority value according
to the VLAN header's 802.1p Class of Service (CoS) tag. The DSCP value can then
be used for Quality of Service (Qos) traffic prioritization. For more information, refer
to Section 8.3.
Figure 9-108: DSCP Remark According to 802.1p CoS
1. Select the 'Enabled' check-box. The screen refreshes, displaying the following
table.