Technical information

Watson SHDSL Router
Web-based Management Manual
Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
9-66
Revision: 2012-02-29
1. Select the 'VLAN Interface' radio button and click 'Next'. The 'VLAN Interface'
screen appears.
Figure 9-99: VLAN Interface
2. Select the underlying device for this interface. The drop-down menu will display
Watson's Ethernet connections.
3. Enter a value that will serve as the VLAN ID, and click 'Next'. The 'Connection
Summary' screen appears.
Figure 9-100: Connection Summary
4. Select the 'Edit the Newly Created Connection' check box if you wish to be rout-
ed to the new connection's configuration screen after clicking 'Finish'. This
screen is described later in this chapter.
5. Click 'Finish' to save the settings.
The new VLAN interface will be added to the network connections list, and will be
configurable like any other connection.
9.4.11.2 General
To view and edit the VLAN interface settings, click the 'Ethernet VLAN' link in the
'Network Connections' screen (see Figure 9-11). The 'VLAN Properties' screen ap-