Technical information

Watson-SHDSL-Router-GUI-Manual.doc
Version 2.3-03
Watson SHDSL Router
Web-based Management Manual
Revision: 2012-02-29
9-61
Routing Table Allows you to add or modify routes when this device is active.
Use the 'New Route' button to add a route or edit existing routes.
Figure 9-91: Advanced Routing Properties
To learn more about this feature, refer to Section 9.6.1.
9.4.10.6 Bridging
This section allows you to specify the devices that you would like to join under the
network bridge. Click the action icon under the 'VLANs' column to assign the
network connections to specific virtual LANS. Select the 'STP' check box to enable
the Spanning Tree Protocol on the device. You should use this to ensure that there
are no loops in your network configuration, and apply these settings in case your
network consists of multiple switches, or other bridges apart from those created by
the gateway.
Figure 9-92: Bridge Settings